Webmail | Contacts

----Program courses offered..

Program Courses-- Electrical and Electronics Engineering


About Department

  The Department of ELECTRICAL AND ELECTRONICS ENGINEERING was established in the year 2008 with an intake of 60 students. Our mission is to impart technical knowledge and skills to the students to become technically sound, practical and self sufficient Electrical Engineers. Apart from making them good technocrats, we also provide individual attention to make them good citizens of our nation to serve the society. The department functions with efficient faculty and well equipped lab facilities.

   It has conducted many technical symposium and workshops. The teaching and research activities are supported by a team of Dean, Professor, Assistant Professor and Lecturers who were well qualified and experienced in their field of study. Our Department has well established state-of-art laboratories to inculcate practical knowledge to the students and it is well structured and built with spacious, ventilated class rooms.


-->To produce socially responsible, innovative electrical engineers.


--> To produce competent and disciplined Electrical Engineers with the spirit of professionalism and responsible citizenship.
--> To provide mentoring, intellectual stimulation, industry collaborations, outreach programmes to our graduate.
--> To offer placement opportunities in electrical and software professional and make them to pursue higher studies.

Program Educational Objectives (PEOs)

A graduate of the Electrical and Electronics Engineering Program will:

PEO:1. Apply their broad knowledge acquired in Mathematics, Basic Sciences and Electrical and Electronics Engineering courses, to the solution of complex problems encountered in the modern Engineering practice.

PEO:2. Exhibit professional and ethical attitude, effective communication skills, teamwork skills, multidisciplinary approach and will relate engineering issues to broader social context.

PEO:3. Display an ability to learn and adapt them to the constantly evolving technology by pursuing higher studies.

PEO:4. Have better employable scope and achieve success in their chosen areas of Electrical and Electronics Engineering and related fields.

Program Outcomes(POs)

PO1: Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.

PO2: Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.

PO3: Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.

PO4: Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.

PO5: Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.

PO6: The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.

PO7: Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.

PO8: Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.

PO9: Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.

PO10: Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PO: 11: Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.

PO12: Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Laboratory Details --> click the arrow to control the panel


Electrical and Electronics Engineering is equipped with:










  Measurements and Instrumentation Laboratory

LVDT kit, Multimeter, Bourdon pressure transducer kit, Foot pump, Voltmeter, Maxwell’s inductance Capacitance Bridge kit, Schering Bridge kit, Wheat stone Bridge kit, Kelvin Double bridge kit, Operational Amplifier, RPS, IC 74, DC trainer kit, CRO, Resistance ,Capacitance, Energy meter, Wattmeter, Stop watch, M.I Ammeter, M.I Voltmeter, Current Transformer, Lamp Load, 3 phase Auto transformer, Maxwell bridge set up, Ring specimen, Ammeter, Galvanometer






  Control Systems Laboratory

DC servo motor,Tachometer  
Multimeter, Stop watch, AC Servo Motor, Rigged up models of type-0 and type-1 system using analog components, Variable frequency square wave generator and a normal CRO, Various meters, DC Generator, System with MATLAB software, AC and DC position control kit with DC servo motor, Stepping motor,Microprocessor kit, Interfacing card,Power supply








  Electrical Machines Laboratory – I

D.C motor Generator set,D.C motor Shunt Generator, D.C motor Compound Generator, D.C. Shunt Motor, D.C. Series Motor, D.C. Compound Motor, Single phase transformers, Three phase transformers, D.C. Motor – Alternator set, Three phase Induction Motor (Squirrel cage), Three phase slip ring Induction Motor, Single phase Induction Motor, Resistive load  
3 phase &single phase, Inductive load, Single phase Auto transformer, Three phase Auto transformer, Tachometers, Single element wattmeters of different ranges UPF / LPF








Power Electronics Laboratory

Device characteristics (for SCR, MOSFET, TRIAC and IGBT) kit with built in power supply & meters, SCR firing circuit module, Single phase SCR based half controlled converter & fully controlled converter along with built-in /separate / firing circuit / module and meter, MOSFET based step up and step down choppers, IGBT based single phase PWM inverter module, IGBT based three phase PWM inverter module, IGBT based high switching frequency chopper module with built-in controller, Resonant DC-DC conveter module with built in power supply and controller, SCR & TRIAC based 1 phase A.C.phase controller along with lamp or rheostat load, along with lamp or rheostat load,SCR based V/I commuted chopper module with relevant firing module (separate or built-in), Dual regulated DC power supply with common ground, Cathode Ray Oscilloscope, Isolation Transformer, Single phase Auto transformer, LCR meter, Rheostats of various ranges






  Electrical Machines Laboratory II

DC shunt motor coupled three phase alternator, Synchronous motor coupled to DC motor, Three phase induction motors Squirrel cage Slip ring, DC Shunt motor coupled salient pole three phase alternator, Single phase induction motors , Air core inductor to do ZPF, Starter-Three phase induction motor starters, Single phase induction motor starters, Single phase auto transformer, Three phase auto transformer




  Power System Simulation Laboratory

Personal computers (Pentium-IV, 80GB, 512 MBRAM), Printer laser,  
Dotmatrix,Server (Pentium IV, 80GB, 1GBRAM) (HighSpeed Processor)  
Software: MIPOWER  
5 licenses,Compliers: C, C++, VB, VC++




  Embedded Systems Laboratory

MATLAB, MATLAB Lab View, KEIL IDE vision 2 software, Micro Controller Board(Intel/Philips/Silabs 8083/87C5xx/803xx/80L5xx/8F5xx) Xilinx Cool runner, Xilinx webpack, ORCADE 9.1 Cadence, mentor graphics design tools/PSpice


  Physics Lab

Lees’ disc apparatus,Air Wedge apparatus,Spectrometer, Diode laser or He-Ne laser,Ultrasonic interferometer, B-H Curve traces apparatus ,Torsional Pendulum apparatus,Non-uniform Bending apparatus, Viscosity apparatus, Band gap apparatus/ Post office ,Carey Foster Bridge


  Chemistry Lab

Electronic balance, pH meter,Conductivity bridge, Potentiometer, Platinum electrodes,Calomel electrodes, Spectrophotometer, Flame photometer,Oswald viscometer, Glassware


 Electrical Circuits Lab

C.R.O, D.C, Power Supply, Function Generator, Digital Storage Oscilloscope


Communication Skills Laboratory

PIV system,1 GB RAM / 40 GB HDD,OS: Win 2000 server,Audio card with headphones (with mike),JRE 1.3,Interactive Teacher Control Software ,English Language Lab Software, Career Lab software, Handicam Video Camera (with video lightsand mic input),Television – 29, Collar mike, Cordless mikes, Audio Mixer, DVD Recorder / Player, LCD Projector with MP3 /CD /DVD provision for audio / video facility


 Computer Practice Laboratory – I & II

LAN system with 33 nodes,Printer,Operating System(Windows /Unix Clone),C compiler, Application package (Office suite)


 Engineering Practices Lab

Assorted components for plumbing, Carpentry vice consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions,elbows, plugs and other fittings, Standard woodworking tools, Models of industrial trusses, door joints,furniture joints, Power Tools like Rotary Hammer, Demolition Hammer, Circular Saw, Planer, Hand Drilling Machine, Jigsaw.
Arc welding transformer with cables and holders, Welding booth with exhaust facility, Welding accessories like welding shield,chipping hammer, wire brush Oxygen and acetylene gas cylinders,blow pipe and other welding outfit, Centre lathe,Hearth furnace, anvil and smithy tools,Moulding table, foundry tools,Power Tool Angle Grinder, centrifugal pump,air-conditioner
Soldering guns, Multi Meters,Small PCBs ,Assorted electronic components for making circuits, Telephone, FM radio, low-voltage power supply
Assorted electrical components for house wiring, Electrical measuring instruments, Megger,Iron box, fan and regulator, emergency lamp,Range Finder,Digital Live-wire detector





© 2014 Veltech High Tech Dr.Rangarajan Dr.Sakunthala Engineering College All Rights Reserved. E-mail: Emailto@velhightech.com