Mech Dr.V.Sathiyamoorthy

Name                             :: Dr.V.Sathiyamoorthy

Designation                ::Associate  Professor

Contact Address        :: Dept. of Mechanical Engineering, Vel Tech High Tech Dr.Rangarajan Dr. Sakunthala Engg. College, Avadi.

Degree                           :: B.E., M.E., Ph.D.

Degree University Field of Specialisation
B.E., Anna University Mechanical Engineering
M.E., Anna University Computer Aided Design
Ph.D. Anna University Manufacturing

Years of Experience   :: 08 Years 01 Months

Conference Attended           :: 06 

  1. Sathiyamoorthy, V &  Sekar, T 2011, ‘Electrochemical Machining – A Review’, 1st International Conference in South Asia On Global Manufacturing Systems & Management (ICGMSM), Coimbatore institute of technology, Coimbatore. pp. 19-26.
  1. Sathiyamoorthy, V, Sekar, T, Elango, N, Suresh, P &  Kannan, PR  2014, ‘Optimization of processing parameters in ECM of AISI 202 using Multi Objective Genetic Algorithm’, International conference on modeling optimization and computing 2014, NICHE, Kumaracoil, Thuckalay, South India.
  1. Sathiyamoorthy, V &  Sekar, T 2013, ‘Improving Machining Performance of ECM Using Aluminium Powder Mixed Electrolyte’,2nd National Conference on Technical Advancements in Mechanical Engineering (TAME-2013), Selvam College of  Technology, Namakkal.
  1. Sathiyamoorthy, V &  Sekar, T 2011, ‘Analysis of Electrochemical machining toll using Ansys CFX ’, National Conference on Extreme Engineering and technical Advancements (XETA-2008), Jayam College of   Engineering and Technology, Dharmapuri.
  1. Ankur Malviya, Chandrasekaran R & Sathiyamoorthy V, 2016, ‘GSCEM in Forward Supply Chain Management- A Review’ Seminar Proceeding International Seminar On Non-Conventional Energy Sources for Sustainable Development of Rural Areas 17th & 18th March 2016,  Parthivi College of Engineering and Management, Bhilai, Chattisgarh, India.
  1. Sathiyamoorthy V, 2016, ‘Application of corrosion resistance material in cement preheater to reduce the fuel consumption at high temperature’, 14th national conference, technologia 2016 on future clean and sustainable energy technologies, Christian college of engineering & technology on 10th & 11th February 2016,bhilai,India.

Research Paper Published:: 12

  1. Sathiyamoorthy, V & Sekar, T 2015, ‘Optimization of processing parameters in ECM of Die Tool Steel using Nano fluid by Multi Objective Genetic Algorithm’, The Scientific World Journal, vol. 2015, Article ID 895696, pp. 1-6.
  1. Sathiyamoorthy, V & Sekar, T 2015, ‘Optimization of Processing Parameters in ECM of Aisi 202 Using Multi Objective Genetic Algorithm’, The International Journal of Enterprise Network Management, Vol. 7, No. 2, pp.133-141.
  1. Sathiyamoorthy, V, Sekar, T & M.Subramanian 2016, ‘Experimental Investigation On The Effects of Nano Fluid In Ecm of High Carbon High Chromium Die Tool Steel’, Asian Journal of Research In Social Sciences And Humanities. Vol. 6, No. 8, pp. 100-110.
  1. Sekar T , Arularasu M  &  Sathiyamoorthy V, 2016, ‘Investigations on the effects of Nano-fluid in ECM of die steel’, Measurement, Elsevier, Volume 83, pp. 38–43.
  1. Suresh,P, Venkatesan,R, Sekar,T, Elango, N & Sathiyamoorthy,V 2014 ‘Optimization of Intervening Variables in MicroEDM of SS 316L using Genetic Algorithm and Response Surface Methodology’, Strojniški vestnik – Journal of Mechanical Engineering, vol. 60, no. 10, pp. 656-664.
  1. Sathiyamoorthy, V & Sekar, T 2013, ‘Experimental Investigation on the Effects of Copper Nano Particles Suspended NaNO3 Electrolyte   in ECM’, International Review of Mechanical Engineering (IREME), vol. 7, no. 7, pp. 1523-1528.
  1. Sathiyamoorthy, V & Sekar, T 2014  ‘Experimental studies on improving the performance of electrochemical machining of high carbon high chromium die steel using jet patterns’, Carbon – Science and Technology, vol. 6, no.1, pp. 321-329.
  1. Sathiyamoorthy, V & Sekar, T 2015, ‘Optimization of processing parameters in electrochemical machining of AISI 202 using response surface methodology’, Journal of Engineering Science & Technology, vol. 10, issue 6. PP.780-789.
  1. Sathiyamoorthy, V Sekar, T & Elango, N 2015, ‘Optimization Of Processing Parameters In ECM Of Automotive Die Tool Steel Using MOGA’ , International Journal of Mechanical Engineering Research. ISSN 2249-0019 Volume 5, Number 1 (2015), pp. 9-18.
  1. Suresh, P, Venkatesan, R, Sekar, T & Sathiyamoorthy,V 2014, ‘Study of microEDM parameters of Stainless Steel 316L: Material Removal Rate Optimization using Genetic Algorithm;, International Journal of Engineering and Technology (IJET), vol. 6, no. 2, pp. 1065-1071.
  1. Sathiyamoorthy, V, Sekar, T & M.Subramanian 2015, ‘Optimization of Copper Nano-Fluid Used ECM By Firefly Algorithm’ , International Journal of Applied Engineering Research. Volume 10, Number 9, pp. 24287-24298.
  1. Chandrasekaran and V. Sathiyamoorthy 2016, ‘ India And Higher Technical Education: A Bird’s Eye View with Particular Focus on Technical Education’, International Journal of Engineering Researches and Management Studies, Vol. 3 No. 7, pp.12-17.

Memberships in Professional Bodies:

  1. MISTE- LIFE MEMBER IN INDIAN SOCIETY FOR TECHNICAL EDUCATION
  2. MUAMAE- MEMBER IN UNIVERSAL ASSOCIATION OF MECHANICAL AND AERONAUTICAL ENGINEERS
  3. MIAE- INTERNATIONAL ASSOCIATION OF ENGINEERS

 Reviewer / Editorial board:

  1. Journal of Engineering Science and Technology, Taylor’s University, Malaysia – Reviewer
  2. International Journal of Research in Manufacturing Technology & Management- Editorial Board Member
  3. International Journal of Current Research in Engineering and Technology -Editor-in-Chief
sathiyamoorthy